Industrial Equipwash has developed powder samplers and liquid samplers for the chemical, pharma, food and allied process industries.
Powder samplers
These powder samplers with interchangeable dies for unit-dose sampling are available in different diameters, lengths and models. Made of 316 stainless steel, these samplers may have one sample port or multiple sample ports for simultaneous sampling at several locations. Any number of sample ports may be blocked with blank dies.
Single, duplicate or triplicate sampling at each sample port is possible. Duplicate and triplicate samples are obtained from exactly the same spot at each sample port with just one insertion of the sampler into the powder bed. Segmented design samplers facilitate sampling from large blenders with roof height limitation. Stainless steel inner shaft is hollow to make the sampler lighter. Inner shafts, custom-made of Teflon are available. The samplers are passivated and easily cleanable with movable conical end pieces.
Liquid samplers
This liquid sampler is custom-made to suit the customer’s sampling bottles and it takes samples directly into the bottles. The bottles are (preferably plastic) held inside stainless steel cups and do not get wet outside. The same sampler may be used with different size bottles by simply changing the bottle adapters. The bottle adapters and the bottle sealing closures are made of FDA approved plastics while the rest of the sampler is made of 316 stainless steel. The stainless steel cups are welded to the shaft so that they do not have a chance to drop into the tank. Sampler is sterilizable, easily cleanable, and is ideal for sampling of large volumes (20cc and up) from drums, tanks, mixers, reactors, etc.
Contact Details:
Industrial Equipwash
8B, Surat Singh Indl Estate
Behind Agarwal Indl Estate
Off SV Road, Jogeshwari (West)
Mumbai – 400 102
Tel: (022) 2679 7941
Fax: (022) 2679 2936
Email: iewi@mtnl.net.in
Website : www.iewi.net