Labtop laminar flow chamber exist in both horizontal and vertical configuration. These laminar air flows are widely used in pharma industries, hospitals, manufacturing facilities, blood banks and research centres. Laminar flow cabinets may have a UV-C germicidal lamp to sterilise the cabinet and contents when not in use.
Construction
All laminar flow clean air cabinets are basically constructed with an outer body of mild steel duly powder coated. The inner work table is made of stainless steel. The front of the cabinet is provided with motorised glass door which is very easy to use.
The micro controller controls the ON/OFF for blower operation, UV germicidal light, fluorescent light, and mains. A high quality air velocity sensor helps in sensing the actual air flow in FPM. This microprocessor warns for any deviations in the air velocity from normal velocities.
Blower motor assembly
Dynamically balanced, direct drive highly efficient centrifugal blower to provide adequate air flow over the entire surface of HEPA filter. These are directly coupled to an inbuilt motor and operate with minimum noise level i.e. lower than 65 db on scale and vibration less than 2.5 um.
Air flow and filtration
Laminar air flow principle involves double filtration of air. Atmospheric air is drawn through pre filter and is made to pass through highly effective HEPA (High Efficiency Particulate Air) filters having efficiency rating as high as 99.99 per cent with cold DOP and 99.97 per cent with hot DOP, thus retaining all airborne particles of size 0.3 micron and larger.
Contact Details:
Byju George
Director
Labtop Instruments
Labtop House, Plot No. 59
Opp. Amarson, Waliv Phata
Sativali Road, Vasai (East)
Dist. Thane – 401208
Maharashtra (India)
Tel: (0250) 6457 376-99 (24 Lines)
Email: byju@labtopinstruments.com
Web: www.labtopinstruments.com
NB: Specifications are subject to change without prior notice.